Marko Zivkovic

How to import data from an Excel file to a SQL Server database

November 10, 2017 by

There are many ways to import data from an Excel file to a SQL Server database using:

In this article, steps for importing data from an Excel file to a SQL Server database will be explained using the SQL Server Import and Export Wizard including some of problems that can occur during the processes.

To start the process of importing data from an Excel file to a SQL Server database using the SQL Server Import and Export Wizard the SQL Server Import and Export Wizard needs to be launched. There are several ways to do that, and this can be seen on the How to import/export data to SQL Server using the SQL Server Import and Export Wizard page

The first page that appears when the SQL Server Import and Export Wizard launched is Welcome page:

On this page, only a quick introduction of the SQL Server Import and Export Wizard is shown.

Click the Next button to continue. The next page in the SQL Server Import and Export Wizard is Choose a Data Source page:

In the Choose a Data Source page, in order to continue with importing data from Excel to SQL Server the data source provider and way of connecting with data source must be provided. In our case, the provider for connecting to the Excel file is the Microsoft Excel provider.

From the Data source drop down box, select the Microsoft Excel provider:

As you can see, there is no Microsoft Excel provider in the list of the Data source drop down box. There are several reasons for this. The first reason could be that Microsoft Office isn’t installed. But there is no need to install Microsoft Office (Microsoft Excel) in order to see the Microsoft Excel provider in the Data source drop down box list.

To see the Microsoft Excel provider in the list, install Microsoft Access Database Engine 2016 Redistributable. The latest version of Microsoft Access Database Engine can open the earlier version of Excel, so make sure that you have the latest one.

The Microsoft Access Database Engine 2016 Redistributable comes with two versions:

  • AccessDatabaseEngine.exe is 32-bit version
  • AccessDatabaseEngine_X64.exe is 64-bit version

Now, when Microsoft Access Database Engine 2016 Redistributable is installed, we should see the Microsoft Excel provider in the list, but unfortunately the Microsoft Excel provider does not show in the list of the Data source drop down box.

This is because you may run a wrong version of the SQL Server Import and Export Wizard. For example, the AccessDatabaseEngine.exe is installed and the SQL Server Import and Export Wizard 64-bit version is launched. In this case, in order to see the Microsoft Excel provider in the list of the Data source drop down box, launch the SQL Server Import and Export Wizard 32-bit version and the Microsoft Excel provider will appear in the list:

Now, when all is installed, from the list, select the Microsoft Excel provider. On the Choose a Data Source page, additional options appear:

In the Excel file path box, type the location to the Excel file or use the Browse button to navigate to the location:

From the Excel version drop down box, choose the version of Excel that uses the source workbook. In our case, that is the Microsoft Excel 2016 version:

The latest option on this page is the First row has column names check box:

By default, this option is checked. It treads the first rows of the data source as the column names:

But if this option is enabled and data source does not contain column names, the SQL Server Import and Export Wizard will add the column names, starting with the name F1 for the first column name:

If this option is disabled and data source contain the column names the SQL Server Import and Export Wizard treats these columns as the first row of data:

Now, when everything is set on the Choose a Data Source page of the SQL Server Import and Export Wizard, click the Next button to continue.

The following warning message may appear after clicking the Next button:

The operation could not be completed.

Additional information:

The ‘Microsoft.ACE.OLEDB.16.0’ provider is not registered on the local machine. (System.Data)

Typically, this warning message appears when the SQL Server Import and Export Wizard is launched via SQL Server Management Studio (SSMS) which is a 32-bit application and the 32-bit version of the SQL Server Import and Export Wizard is launched, but you have installed the Microsoft Access Database Engine 2016 Redistributable 64 bit version.

There are two solutions for resolving this problem:

Note: The Microsoft Access Database Engine 2016 Redistributable can be installed in quiet mode.

Open the Command Prompt window and run the following:

For 32-bit version

C:\Users\<User_Name>\Downloads\AccessDatabaseEngine.exe /quiet

For 64-bit version

C:\Users\<User_Name>\Downloads\AccessDatabaseEngine_X64.exe /quiet

The next page on the SQL Server Import and Export Wizard is the Choose a Destination page:

On this page, determine the destination where data from the data source (Excel file) will be placed. In our case, the destination will be a SQL Server database.

Under the Destination drop down box, choose a provider that can connect to a SQL Server database.

One of providers that can connect to SQL Server is:

In this case, the SQL Server Native Client 11.0 will be selected from the Destination list:

From the Server name combo box, select the SQL Server instance:

In the Authentication section, determine how it will be connected to SQL Server by using Windows or SQL Server Authentication mode.

From the Database drop down box, pick a database in which data from data source (Excel file) will be placed:

Or, create a new database as a destination for data from data source.

To do that, click the New button and in the Create Database dialog, set the parameters for the new SQL Server destination database:

When everything is set on the Choose a Destination page, click the Next button to proceed.

On the Specify Table Copy or Query page, determine how data from the data source will be copied to the destination:

If the Copy data from one or more tables or views radio button is selected then all data from the chosen worksheets will be copied.

If the Write a query to specify the data to transfer is chosen, then only data that are specified in a SQL query will be copied from an Excel worksheet to a destination SQL Server database.

If the Write a query to specify the data to transfer in the Choose a Destination page is chosen, then the Provide a Source Query page will be shown when the Next button is pressed:

In the SQL statement text box, type the query that will select the data to copy form the Excel file to the SQL Server database or load a query using the Browse button.

To successfully query a worksheet the $ to the end of the sheet name and the brackets around sheet name, ([BusinessEntity$]) must be added, otherwise the following warning messages may appear:

The statement could not be parsed.

Additional information:

The Microsoft Access database engine could not find the object ‘BusinessEntity’. Make sure the object exists and that you spell its name and the path name correctly. If ‘BusinessEntity’ is not a local object, check your network connection or contact the server administrator. (Microsoft Access Database Engine)

Or this:

The statement could not be parsed.

Additional information:

Syntax error in FROM clause. (Microsoft Access Database Engine)

If the Copy data from one or more tables or views radio button is chosen, when the Next button is pressed, the Select Source Tables and Views page will be shown:

On this page, all worksheets for the Excel file (ImportData.xlsx) will be listed under the Source column. From the Source list, choose from which worksheets you want to import data to the SQL Server database by clicking the check box next to the name of the worksheets. The selected worksheets will appear in the Destination column:

The name of the tables in the SQL Server database by default will be the names of the selected worksheets from the Source column, but these names can be changed by clicking on the name in the Destination column:

As it may be noticed, the icon in the Destination column for the BusinessEntity$ field is different from the Table1 and Table2 fields. This is because the table in the SQL Server database that is chosen as a destination already exists and for the Table1 and Table2 fields, new tables will be created.

When using an existing table, make sure that the destination table has the same number of columns that have data source, otherwise the columns from the data source that does not have an adequate destination column will be by default ignored (<ignore>) and the data from that columns will not be imported to a destination table:

Also, make sure that columns in the destination table have data types that are compatible with the data types in the columns of the source data, otherwise the following error may appear:

Found 1 unknown column type conversion(s) You are only allowed to save the package

When the appropriate columns and the data types are set, click the Next button, the Save and Run Package page of the SQL Server Import and Export Wizard will appear:

Click the Next button if want to import data from an Excel file to a SQL Server database, but if want to save the SSIS package for the later use, check the Save SSIS Package button.

On the Complete the Wizard page, choices that are made in the previous wizard pages are shown:

Click the Next button to import data from an Excel file to a SQL Server database. The Performing Operation page shows the status of the importing process if it is finished successfully or with the errors:

If the error occurs during the process of importing data from Excel file to the SQL Server database the Messages… word will appear in the Message column for the action that failed:

When click on the Messages…, the View Report dialog will appear with detailed information about the error:

This error:

– Validating (Error)

Messages

  • Error 0xc0202049: Data Flow Task 1: Failure inserting into the read-only column “numb”.
    (SQL Server Import and Export Wizard)
  • Error 0xc0202045: Data Flow Task 1: Column metadata validation failed.
    (SQL Server Import and Export Wizard)
  • Error 0xc004706b: Data Flow Task 1: “Destination – test1” failed validation and returned validation status “VS_ISBROKEN”.
    (SQL Server Import and Export Wizard)
  • Error 0xc004700c: Data Flow Task 1: One or more component failed validation.
    (SQL Server Import and Export Wizard)
  • Error 0xc0024107: Data Flow Task 1: There were errors during task validation.
    (SQL Server Import and Export Wizard)

Typically, it appears when the destination table has an IDENTITY column. To resolve this, turn back to the Select Source Tables and Views page, select the tables that have identity property and press the Edit Mappings button. From the Transfer Settings dialog, select the Enable identity insert check box:

Also, another common problem that may appear when importing data from data source to the destination SQL Server tables is the FOREIGN KEY Constraints problem. In the error below two destination tables test1 and test2 are shown. The test2 table is referenced to the test1 table:

– Copying to [dbo].[test1] (Error)

Messages

  • Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component “Destination 1 – test2” (79) failed with error code 0xC0209029 while processing input “Destination Input” (92). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)
  • Information 0x402090df: Data Flow Task 1: The final commit for the data insertion in “Destination – test1” has started.
    (SQL Server Import and Export Wizard)
  • Information 0x402090e0: Data Flow Task 1: The final commit for the data insertion in “Destination – test1” has ended.
    (SQL Server Import and Export Wizard)

– Copying to [dbo].[test2] (Error)

Messages

  • Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available. Source: “Microsoft SQL Server Native Client 11.0” Hresult: 0x80004005 Description: “The statement has been terminated.”.
    An OLE DB record is available. Source: “Microsoft SQL Server Native Client 11.0” Hresult: 0x80004005 Description: “Cannot insert the value NULL into column ‘No_id’, table ‘ImportData.dbo.test2’; column does not allow nulls. INSERT fails.”.
    (SQL Server Import and Export Wizard)
  • Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The “Destination 1 – test2.Inputs[Destination Input]” failed because error code 0xC020907B occurred, and the error row disposition on “Destination 1 – test2.Inputs[Destination Input]” specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)

To resolve this problem, disable constraint for referenced table (test2) by executing the following code in SSMS:

After importing data from data source to the destination SQL Server database, execute the following code in SSMS to enable constraint for the test2 table:

In some cases, the warning message like from the image below may appear:

– Validating (Warning)

Messages

  • Warning 0x802092a7: Data Flow Task 1: Truncation may occur due to inserting data from data flow column “AddressLine1” with a length of 255 to database column “AddressLine1” with a length of 60.
    (SQL Server Import and Export Wizard)
  • Warning 0x802092a7: Data Flow Task 1: Truncation may occur due to inserting data from data flow column “AddressLine2” with a length of 255 to database column “AddressLine2” with a length of 60.
    (SQL Server Import and Export Wizard)
  • Warning 0x802092a7: Data Flow Task 1: Truncation may occur due to inserting data from data flow column “City” with a length of 255 to database column “City” with a length of 30.
    (SQL Server Import and Export Wizard)
  • Warning 0x802092a7: Data Flow Task 1: Truncation may occur due to inserting data from data flow column “AddressLine1” with a length of 255 to database column “AddressLine1” with a length of 60.
    (SQL Server Import and Export Wizard)
  • Warning 0x802092a7: Data Flow Task 1: Truncation may occur due to inserting data from data flow column “AddressLine2” with a length of 255 to database column “AddressLine2” with a length of 60.
    (SQL Server Import and Export Wizard)
  • Warning 0x802092a7: Data Flow Task 1: Truncation may occur due to inserting data from data flow column “City” with a length of 255 to database column “City” with a length of 30.
    (SQL Server Import and Export Wizard)
  • Warning 0x80049304: Data Flow Task 1: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system’s console.
    (SQL Server Import and Export Wizard)

To resolve this, go to the SQL Server destination table and increase the column size for the columns that are listed in the warning message.

To verify that the data from the Excel file are imported to the SQL Server database, go to SSMS, find the database in which data are imported and list all data from the tables:

References:

Marko Zivkovic
Latest posts by Marko Zivkovic (see all)

Related posts:

  1. How to import/export data to SQL Server using the SQL Server Import and Export Wizard
  2. How to export data from SQL Server to a Flat file
  3. Cómo poder importar los datos de un archivo de Excel a una base de datos de SQL Server
  4. Cómo importar/exportar datos a SQL Server utilizando el Asistente para importación y exportación de SQL Server
  5. Import data from multiple Excel files into SQL Server tables using an SSIS package
Excel, Importing, exporting

About Marko Zivkovic

Marko aka “Zivko” is a senior software analyst from Nis, Serbia focusing on SQL Server and MySQL as well as client technologies like SSMS, Visual Studio, and VSCode. He has extensive experience with quality assurance, issue escalation/resolution, and product evangelism. He is a prolific author of authoritative content related to SQL Server including a number of “platinum” articles (top 1% in terms of popularity and engagement). His writing covers a range of topics on MySQL and SQL Server including remote/linked servers, import/export, LocalDB, SSMS, and more. In his part-time, Zivko likes basketball, foosball (table-soccer), and rock music. See more about Marko at LinkedIn View all posts by Marko Zivkovic

168 Views